#18203: "Swiss tournament pairing improvement: ranking based pairing"
Какво се случи? Моля изберете от списъка по-долу
Какво се случи? Моля изберете от списъка по-долу
Моля, проверете дали вече има доклад по същия въпрос
Ако отговорът е „да“, моля, гласувайте за този доклад. Отчетите с най-много гласове са дадени ПРИОРИТЕТ!
# | Status | Votes | Game | Type | Title | Last update |
---|
Подробно описание
• Моля поставете тук съобщението за грешка което виждате, ако има такова
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Моля обяснете, какво искахте да направите, какво направихте и какво се случи
• Какъв е вашия браузър?
Google Chrome v81
• Моля копирайте/поставете текстът показан на аглийски, вместо на Вашия език. Ако имате скрийншот на този бъг (добре е да правите), можете да използвате Imgur.com за да качите и копирате линка тук.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Наличен ли е този текст в системата за превод? Ако да, бил ли е преведен за повече от 24 часа?
• Какъв е вашия браузър?
Google Chrome v81
• Моля обяснете вашето придложение ясно и кратко така че да бъде възможно най-разбираемо.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Какъв е вашия браузър?
Google Chrome v81
• Какво е било показано на екрана, когато сте били блокирани (празен екран? Част от интерфейса на играта? Съобщение за грешка?)
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Какъв е вашия браузър?
Google Chrome v81
• Коя част от правилата не е била спазена от BGA адаптацията
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Нарушенията на правилата видими ли са при повторение на играта? Ако да, на кой ход се случват?
• Какъв е вашия браузър?
Google Chrome v81
• Какъв бе игровият ход, който се опитахте да извършите?
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Какво се опитвате да направите, за да задействате тази игра?
• Какво се случи, когато се опитахте да направите това (съобщение за грешка, съобщение за статуса на играта, ...)?
• Какъв е вашия браузър?
Google Chrome v81
• В кой момент от играта се появи проблема (каква е била съответната инструкция в играта)?
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Какво се случи, когато се опитахте да извършите действието в играта (съобщение за грешка, съобщение за статуса на играта, ...)?
• Какъв е вашия браузър?
Google Chrome v81
• Моля опишете грешката при изобразяването Ако имате скрийншот на този бъг (добре е да правите), можете да използвате Imgur.com за да качите и копирате линка тук.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Какъв е вашия браузър?
Google Chrome v81
• Моля копирайте/поставете текстът показан на аглийски, вместо на Вашия език. Ако имате скрийншот на този бъг (добре е да правите), можете да използвате Imgur.com за да качите и копирате линка тук.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Наличен ли е този текст в системата за превод? Ако да, бил ли е преведен за повече от 24 часа?
• Какъв е вашия браузър?
Google Chrome v81
• Моля обяснете вашето придложение ясно и кратко така че да бъде възможно най-разбираемо.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Какъв е вашия браузър?
Google Chrome v81
История на докладванията
Добави нещо към този доклад
- Друга маса ID / Ход ID
- F5 реши ли проблема?
- Проблемът няколко пъти ли се е появил? Или всеки път? Или абсолютно случайно?
- Ако имате скрийншот на този бъг (добре е да правите), можете да използвате Imgur.com за да качите и копирате линка тук.