• Моля поставете тук съобщението за грешка което виждате, ако има такова

The information at the bridge card tells: "You do not discard when placing an Ascent card next to a Bridge card or a Bridge card, but instead when you cover a Bridge card with an Ascent card. When covering a Bridge card between two cards, discard cards equal to the higher difference".

- Covering a Bridge card next to an Ascent card makes to discard the difference.
- Covering a Bridge card between to Ascent cards makex to discard the higher difference.
- But what about covering a lonely bridge card that touches 0 Ascent cards (so the bridge card was used to start the row, and no other cards have yet been placed in that row). There is no exception rule that states covering a lonely bridge card is not allowed or to discard a certain amount of cards. So the rules would state that covering a lonely bridge card just replaces the card without discard.

In the game, it was not possible to replace the lonely bridge card, which however should be possible according to the situation above. Possible reasons:
- There exists a rule that bridge cards can only be covered when touching at least one Ascent card. This rule is then not included in the description of the bridge cards.
- Since covering a lonely bridge cards is an unusual action, the game is set to always calculate the (higher) difference between the touching Ascent card(s) and the Ascent card replacing the bridge card. Since there is no touching Ascent card for a lonely bridge card, the difference could not be calculated. This might then cause that the lonely bridge card cannot be covered, while it should be allowed.

• Моля обяснете, какво искахте да направите, какво направихте и какво се случи

move 47

• Какъв е вашия браузър?

• Моля копирайте/поставете текстът показан на аглийски, вместо на Вашия език. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Наличен ли е този текст в системата за превод? Ако да, бил ли е преведен за повече от 24 часа?

The information at the bridge card tells: "You do not discard when placing an Ascent card next to a Bridge card or a Bridge card, but instead when you cover a Bridge card with an Ascent card. When covering a Bridge card between two cards, discard cards equal to the higher difference".

- Covering a Bridge card next to an Ascent card makes to discard the difference.
- Covering a Bridge card between to Ascent cards makex to discard the higher difference.
- But what about covering a lonely bridge card that touches 0 Ascent cards (so the bridge card was used to start the row, and no other cards have yet been placed in that row). There is no exception rule that states covering a lonely bridge card is not allowed or to discard a certain amount of cards. So the rules would state that covering a lonely bridge card just replaces the card without discard.

In the game, it was not possible to replace the lonely bridge card, which however should be possible according to the situation above. Possible reasons:
- There exists a rule that bridge cards can only be covered when touching at least one Ascent card. This rule is then not included in the description of the bridge cards.
- Since covering a lonely bridge cards is an unusual action, the game is set to always calculate the (higher) difference between the touching Ascent card(s) and the Ascent card replacing the bridge card. Since there is no touching Ascent card for a lonely bridge card, the difference could not be calculated. This might then cause that the lonely bridge card cannot be covered, while it should be allowed.

• Какъв е вашия браузър?

• Моля обяснете вашето придложение ясно и кратко така че да бъде възможно най-разбираемо.

The information at the bridge card tells: "You do not discard when placing an Ascent card next to a Bridge card or a Bridge card, but instead when you cover a Bridge card with an Ascent card. When covering a Bridge card between two cards, discard cards equal to the higher difference".

- Covering a Bridge card next to an Ascent card makes to discard the difference.
- Covering a Bridge card between to Ascent cards makex to discard the higher difference.
- But what about covering a lonely bridge card that touches 0 Ascent cards (so the bridge card was used to start the row, and no other cards have yet been placed in that row). There is no exception rule that states covering a lonely bridge card is not allowed or to discard a certain amount of cards. So the rules would state that covering a lonely bridge card just replaces the card without discard.

In the game, it was not possible to replace the lonely bridge card, which however should be possible according to the situation above. Possible reasons:
- There exists a rule that bridge cards can only be covered when touching at least one Ascent card. This rule is then not included in the description of the bridge cards.
- Since covering a lonely bridge cards is an unusual action, the game is set to always calculate the (higher) difference between the touching Ascent card(s) and the Ascent card replacing the bridge card. Since there is no touching Ascent card for a lonely bridge card, the difference could not be calculated. This might then cause that the lonely bridge card cannot be covered, while it should be allowed.

• Какъв е вашия браузър?

• Какво е било показано на екрана, когато сте били блокирани (празен екран? Част от интерфейса на играта? Съобщение за грешка?)

The information at the bridge card tells: "You do not discard when placing an Ascent card next to a Bridge card or a Bridge card, but instead when you cover a Bridge card with an Ascent card. When covering a Bridge card between two cards, discard cards equal to the higher difference".

- Covering a Bridge card next to an Ascent card makes to discard the difference.
- Covering a Bridge card between to Ascent cards makex to discard the higher difference.
- But what about covering a lonely bridge card that touches 0 Ascent cards (so the bridge card was used to start the row, and no other cards have yet been placed in that row). There is no exception rule that states covering a lonely bridge card is not allowed or to discard a certain amount of cards. So the rules would state that covering a lonely bridge card just replaces the card without discard.

In the game, it was not possible to replace the lonely bridge card, which however should be possible according to the situation above. Possible reasons:
- There exists a rule that bridge cards can only be covered when touching at least one Ascent card. This rule is then not included in the description of the bridge cards.
- Since covering a lonely bridge cards is an unusual action, the game is set to always calculate the (higher) difference between the touching Ascent card(s) and the Ascent card replacing the bridge card. Since there is no touching Ascent card for a lonely bridge card, the difference could not be calculated. This might then cause that the lonely bridge card cannot be covered, while it should be allowed.

• Какъв е вашия браузър?

• Коя част от правилата не е била спазена от BGA адаптацията

The information at the bridge card tells: "You do not discard when placing an Ascent card next to a Bridge card or a Bridge card, but instead when you cover a Bridge card with an Ascent card. When covering a Bridge card between two cards, discard cards equal to the higher difference".

- Covering a Bridge card next to an Ascent card makes to discard the difference.
- Covering a Bridge card between to Ascent cards makex to discard the higher difference.
- But what about covering a lonely bridge card that touches 0 Ascent cards (so the bridge card was used to start the row, and no other cards have yet been placed in that row). There is no exception rule that states covering a lonely bridge card is not allowed or to discard a certain amount of cards. So the rules would state that covering a lonely bridge card just replaces the card without discard.

In the game, it was not possible to replace the lonely bridge card, which however should be possible according to the situation above. Possible reasons:
- There exists a rule that bridge cards can only be covered when touching at least one Ascent card. This rule is then not included in the description of the bridge cards.
- Since covering a lonely bridge cards is an unusual action, the game is set to always calculate the (higher) difference between the touching Ascent card(s) and the Ascent card replacing the bridge card. Since there is no touching Ascent card for a lonely bridge card, the difference could not be calculated. This might then cause that the lonely bridge card cannot be covered, while it should be allowed.

• Нарушенията на правилата видими ли са при повторение на играта? Ако да, на кой ход се случват?

move 47

• Какъв е вашия браузър?

• Какъв бе игровият ход, който се опитахте да извършите?

The information at the bridge card tells: "You do not discard when placing an Ascent card next to a Bridge card or a Bridge card, but instead when you cover a Bridge card with an Ascent card. When covering a Bridge card between two cards, discard cards equal to the higher difference".

- Covering a Bridge card next to an Ascent card makes to discard the difference.
- Covering a Bridge card between to Ascent cards makex to discard the higher difference.
- But what about covering a lonely bridge card that touches 0 Ascent cards (so the bridge card was used to start the row, and no other cards have yet been placed in that row). There is no exception rule that states covering a lonely bridge card is not allowed or to discard a certain amount of cards. So the rules would state that covering a lonely bridge card just replaces the card without discard.

In the game, it was not possible to replace the lonely bridge card, which however should be possible according to the situation above. Possible reasons:
- There exists a rule that bridge cards can only be covered when touching at least one Ascent card. This rule is then not included in the description of the bridge cards.
- Since covering a lonely bridge cards is an unusual action, the game is set to always calculate the (higher) difference between the touching Ascent card(s) and the Ascent card replacing the bridge card. Since there is no touching Ascent card for a lonely bridge card, the difference could not be calculated. This might then cause that the lonely bridge card cannot be covered, while it should be allowed.

• Какво се опитвате да направите, за да задействате тази игра?

move 47

• Какво се случи, когато се опитахте да направите това (съобщение за грешка, съобщение за статуса на играта, ...)?

• Какъв е вашия браузър?

• В кой момент от играта се появи проблема (каква е била съответната инструкция в играта)?

The information at the bridge card tells: "You do not discard when placing an Ascent card next to a Bridge card or a Bridge card, but instead when you cover a Bridge card with an Ascent card. When covering a Bridge card between two cards, discard cards equal to the higher difference".

- Covering a Bridge card next to an Ascent card makes to discard the difference.
- Covering a Bridge card between to Ascent cards makex to discard the higher difference.
- But what about covering a lonely bridge card that touches 0 Ascent cards (so the bridge card was used to start the row, and no other cards have yet been placed in that row). There is no exception rule that states covering a lonely bridge card is not allowed or to discard a certain amount of cards. So the rules would state that covering a lonely bridge card just replaces the card without discard.

In the game, it was not possible to replace the lonely bridge card, which however should be possible according to the situation above. Possible reasons:
- There exists a rule that bridge cards can only be covered when touching at least one Ascent card. This rule is then not included in the description of the bridge cards.
- Since covering a lonely bridge cards is an unusual action, the game is set to always calculate the (higher) difference between the touching Ascent card(s) and the Ascent card replacing the bridge card. Since there is no touching Ascent card for a lonely bridge card, the difference could not be calculated. This might then cause that the lonely bridge card cannot be covered, while it should be allowed.

• Какво се случи, когато се опитахте да извършите действието в играта (съобщение за грешка, съобщение за статуса на играта, ...)?

move 47

• Какъв е вашия браузър?

• Моля опишете грешката при изобразяването If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here.

The information at the bridge card tells: "You do not discard when placing an Ascent card next to a Bridge card or a Bridge card, but instead when you cover a Bridge card with an Ascent card. When covering a Bridge card between two cards, discard cards equal to the higher difference".

- Covering a Bridge card next to an Ascent card makes to discard the difference.
- Covering a Bridge card between to Ascent cards makex to discard the higher difference.
- But what about covering a lonely bridge card that touches 0 Ascent cards (so the bridge card was used to start the row, and no other cards have yet been placed in that row). There is no exception rule that states covering a lonely bridge card is not allowed or to discard a certain amount of cards. So the rules would state that covering a lonely bridge card just replaces the card without discard.

In the game, it was not possible to replace the lonely bridge card, which however should be possible according to the situation above. Possible reasons:
- There exists a rule that bridge cards can only be covered when touching at least one Ascent card. This rule is then not included in the description of the bridge cards.
- Since covering a lonely bridge cards is an unusual action, the game is set to always calculate the (higher) difference between the touching Ascent card(s) and the Ascent card replacing the bridge card. Since there is no touching Ascent card for a lonely bridge card, the difference could not be calculated. This might then cause that the lonely bridge card cannot be covered, while it should be allowed.

• Какъв е вашия браузър?

• Моля копирайте/поставете текстът показан на аглийски, вместо на Вашия език. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Наличен ли е този текст в системата за превод? Ако да, бил ли е преведен за повече от 24 часа?

The information at the bridge card tells: "You do not discard when placing an Ascent card next to a Bridge card or a Bridge card, but instead when you cover a Bridge card with an Ascent card. When covering a Bridge card between two cards, discard cards equal to the higher difference".

- Covering a Bridge card next to an Ascent card makes to discard the difference.
- Covering a Bridge card between to Ascent cards makex to discard the higher difference.
- But what about covering a lonely bridge card that touches 0 Ascent cards (so the bridge card was used to start the row, and no other cards have yet been placed in that row). There is no exception rule that states covering a lonely bridge card is not allowed or to discard a certain amount of cards. So the rules would state that covering a lonely bridge card just replaces the card without discard.

In the game, it was not possible to replace the lonely bridge card, which however should be possible according to the situation above. Possible reasons:
- There exists a rule that bridge cards can only be covered when touching at least one Ascent card. This rule is then not included in the description of the bridge cards.
- Since covering a lonely bridge cards is an unusual action, the game is set to always calculate the (higher) difference between the touching Ascent card(s) and the Ascent card replacing the bridge card. Since there is no touching Ascent card for a lonely bridge card, the difference could not be calculated. This might then cause that the lonely bridge card cannot be covered, while it should be allowed.

• Какъв е вашия браузър?

• Моля обяснете вашето придложение ясно и кратко така че да бъде възможно най-разбираемо.

The information at the bridge card tells: "You do not discard when placing an Ascent card next to a Bridge card or a Bridge card, but instead when you cover a Bridge card with an Ascent card. When covering a Bridge card between two cards, discard cards equal to the higher difference".

- Covering a Bridge card next to an Ascent card makes to discard the difference.
- Covering a Bridge card between to Ascent cards makex to discard the higher difference.
- But what about covering a lonely bridge card that touches 0 Ascent cards (so the bridge card was used to start the row, and no other cards have yet been placed in that row). There is no exception rule that states covering a lonely bridge card is not allowed or to discard a certain amount of cards. So the rules would state that covering a lonely bridge card just replaces the card without discard.

In the game, it was not possible to replace the lonely bridge card, which however should be possible according to the situation above. Possible reasons:
- There exists a rule that bridge cards can only be covered when touching at least one Ascent card. This rule is then not included in the description of the bridge cards.
- Since covering a lonely bridge cards is an unusual action, the game is set to always calculate the (higher) difference between the touching Ascent card(s) and the Ascent card replacing the bridge card. Since there is no touching Ascent card for a lonely bridge card, the difference could not be calculated. This might then cause that the lonely bridge card cannot be covered, while it should be allowed.

• Какъв е вашия браузър?