• Моля поставете тук съобщението за грешка което виждате, ако има такова

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Моля обяснете, какво искахте да направите, какво направихте и какво се случи

• Какъв е вашия браузър?

• Моля копирайте/поставете текстът показан на аглийски, вместо на Вашия език. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Наличен ли е този текст в системата за превод? Ако да, бил ли е преведен за повече от 24 часа?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Какъв е вашия браузър?

• Моля обяснете вашето придложение ясно и кратко така че да бъде възможно най-разбираемо.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Какъв е вашия браузър?

• Какво е било показано на екрана, когато сте били блокирани (празен екран? Част от интерфейса на играта? Съобщение за грешка?)

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Какъв е вашия браузър?

• Коя част от правилата не е била спазена от BGA адаптацията

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Нарушенията на правилата видими ли са при повторение на играта? Ако да, на кой ход се случват?

• Какъв е вашия браузър?

• Какъв бе игровият ход, който се опитахте да извършите?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Какво се опитвате да направите, за да задействате тази игра?

• Какво се случи, когато се опитахте да направите това (съобщение за грешка, съобщение за статуса на играта, ...)?

• Какъв е вашия браузър?

• В кой момент от играта се появи проблема (каква е била съответната инструкция в играта)?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Какво се случи, когато се опитахте да извършите действието в играта (съобщение за грешка, съобщение за статуса на играта, ...)?

• Какъв е вашия браузър?

• Моля опишете грешката при изобразяването If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Какъв е вашия браузър?

• Моля копирайте/поставете текстът показан на аглийски, вместо на Вашия език. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Наличен ли е този текст в системата за превод? Ако да, бил ли е преведен за повече от 24 часа?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Какъв е вашия браузър?

• Моля обяснете вашето придложение ясно и кратко така че да бъде възможно най-разбираемо.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Какъв е вашия браузър?